ENT Student Handbook
Our Handbook
The Department of Engineering Technology at 黑料社区 offers a bachelor’s degree program, two associate degree programs, (accredited by the Engineering Technology Accreditation Commission of ABET, ). The baccalaureate program offers majors in Electrical and Computer Engineering Technology; Electro-Mechanical Engineering Technology; Mechanical Engineering Technology and Robotics Engineering Technology, and is designed to enable graduates of the associate degree programs to complete the bachelor’s degree by taking 65 additional credit hours. Majors available in the associate degree programs include Electrical and Computer Engineering Technology or Mechanical Engineering Technology.
As a Miami 黑料社区, you will enjoy excellent faculty, modern facilities, and other amenities associated with a fine university.
Engineering Technology 黑料社区s enjoy opportunities to co-op on an alternating or parallel basis. Students who elect to co-op will be required to attend classes during the summer semester and the length of time to complete their degree will be extended by approximately one semester.
Graduates of the bachelor’s degree program are technologists prepared to fill industrial positions in areas related to industrial automation, mechanical design & analysis, electronic instrumentation, testing, manufacturing, sales, and service. Graduates of the electrical and computer engineering technology program fill paraprofessional positions in electronic testing, network specialist, field service, electronic maintenance, and similar engineering technician roles. Mechanical engineering technology program graduates fill paraprofessional positions in computer-aided drafting, quality control, computer-aided manufacturing, design technician, product testing, maintenance, and similar engineering technician roles.
For more information about these programs or courses and seminars in the field of Engineering Technology, please contact our department chair.
Contents
Statement of Good Teaching Practices
Earning A Living and Paying For College
The following chart shows how much you can expect to earn with a high school diploma, associate degree, and baccalaureate degree.
| Education Level | Gross Annual Income1 |
|---|---|
| Associate Degree in Engineering Technology | $37,000-60,000/year |
| Baccalaureate Degree in Engineering Technology | $45,000-70,000/year |
| High School Diploma | $13,000-25,000/year |
1 Salary ranges based on graduate surveys and Ohio Department of Labor
- Loans, grants, and scholarships are available through the Financial Aid office
- Engineering Technology offers some scholarships
- Co-op - this is the best way to pay for school. You earn money while you learn--and we have more jobs than we can fill! Through co-op, you will find out quickly what you like and don’t like about your field of study. The following information was provided by our co-op/placement office:
- Average co-op wage for Engineering Technology 15.93/hour
- Co-op gross income per SEMESTER
- 15 weeks@40hrs/wk@$15.93/hr $ 9,558.00
- 15 weeks@20hrs/wk@$15.93/hr $4,779.00
- Tuition Cost for a semester (including General Fee and Network & Technology Fee)
- 2012-13 full-time rate, lower division, in-state $2,479.20
- 2012-13 full-time rate, upper division, in-state $3,758.40
- Typical Cost for books & supplies per semester $719.00
The office of Miami Regional Career Services & Professional Development helps 黑料社区s, graduates and alumni find work related to their academic major. Co-op or intern 黑料社区s can arrange to work while taking classes or alternate semesters between work and classes. ENT 220 (Professional Practice) is the class you can enroll in to do a co-op. It can be taken for credit or no credit. If you are interested in doing a co-op, please contact:
Doug Reichenberger
Regional Director, Career Services & Professional Development
122 Rentschler Hall (Hamilton campus) 513-785-3113
105 Johnston Hall (Middletown campus) 513-727-3390
reichedc@MiamiOH.edu
Grading Criteria
The Department of Engineering Technology (ENT) has adopted the following criteria for awarding the letter grades A, B, C, D, and F. An instructor may use the +/- designators to indicate the high or low end of each level. The ENT Department gratefully acknowledges the development of these descriptions by the CSE department and their generosity in letting us use them.
very good knowledge of essential facts, concepts, principles, and theories; the ability to use support tools and to correctly apply this knowledge to the problems assigned in class
Each faculty member will use the following scale in assigning letter grades in their courses, with the following allowances:
- the end (or ends) of any range can be adjusted by 1 point (+/-)
- the assignment of the D- or F may deviate by a few points (2-3) from the values shown
- faculty may elect to not use +/- grades
| Letter grade | Percentage range |
|---|---|
| A+ | 97-100% |
| A | 93-96.9% |
| A- | 90-92.9% |
| B+ | 87-89.9% |
| B | 83-86.9% |
| B- | 80-82.9% |
| C+ | 77-79.9% |
| C | 73-76.9% |
| C- | 70-72.9% |
| D+ | 67-69.9% |
| D | 63-66.9% |
| D- | 60-62.9% |
| F | below 60% |
Degrees and Concentrations
Major: Engineering Technology
Concentrations:
Electrical & Computer Engineering Technology (ECET) Electro-Mechanical Engineering Technology (EMET) Mechanical Engineering Technology (MET)
Robotics Engineering Technology (RET)
Mechanical Engineering Technology (MET)
Math Sequence
Using the results of your Math Placement test, prior math courses, and life experience, an advisor (ENT or Math Department) can assist you with proper math placement. For ENT associate degree programs you are required to complete 8 - 10 hours of math and attain the level of MTH 151.
(beginning with the course that you are placed in)
- Math Emporium
- MTH 125 | Pre-calculus (5 credit hours)
- MTH 151 | Calculus I (5 credit hours)
Course Substitutions
The following is a list of courses required by ENT majors which have departmentally approved substitutions for associate degree programs. Any or all other substitutions require specific advisor (department) approval.
| Required Course | Approved Substitution |
|---|---|
| PHY 171, 172, 173, 174 | PHY 181, 182, 183, 184 |
| ENG 215 | ENG 112 |
| ECO 201 | ECO 202 |
| ENG 215 | ENG 313 (prerequisites: ENG 111 & 112) |
In addition to the above, the department will consider adjustment of technical course requirements (ENT courses) based on career goals or areas of special interest. Ask your advisor for assistance with these substitutions.
Transfer 黑料社区s may require substitutions not listed above. Transfer 黑料社区s should see a department advisor for assistance.
Course Descriptions
Note: One lecture hour is one contact hour. One lab hour is two contact hours.
ENT 135 | Computer-aided Drafting (3)
A study of drafting as the graphic language of industry and application of Computer-aided Technology to two and three-dimensional Engineering drawings. Microcomputers are used.
1 Lecture, 2 Labs
ENT 137 | Introduction to Engineering Technology (1)
An introductory course for 黑料社区s entering Engineering Technology. This course covers broad elementary Engineering concepts to include a definition of Engineering Technology, the distinction between the various areas of focus in Engineering Technology, introduction to Engineering "terminology," and a survey of current issues (problems, research efforts, recent developments, etc.) in the Engineering field.
Prerequisite: high school algebra
ENT 151 | Engineering Materials (3)
A study of basic Engineering materials; metals, plastics, ceramics and composites. Structure, properties, and applications emphasized. (Mechanical Technology)
2 Lectures, 1 Lab
Prerequisite: 2 years of high school algebra
ENT 152 | Computer-aided Manufacturing (3)
An introduction to manufacturing processes and the use of the computer as a tool in those processes. Students will be introduced to computer numerical control programming, statistical process and control, and topics related to the "automated factory." (Mechanical Technology)
2 Lectures, 1 Lab
Prerequisite: 2 years of high school algebra
Co-requisite: MTH 125
ENT 177, 277, 377, 477 | Independent Study (1 - 5)
Independent study courses are available to undergraduate 黑料社区s. You can register for one to five hours of Independent study each semester (no more than 10 per year). Registration for each course will be in accordance with the level of instruction. Independent study projects must be approved by the instructor and the department chair.
ENT 181 | Managing & Troubleshooting PCs (3)
This course provides an in-depth study of personal computer hardware and operating systems. Focus is on identification, installation, configuration, and troubleshooting of field replaceable components. The knowledge and skills obtained in this course will prepare the 黑料社区 for the CompTIA A+ Certification Technician Exam.
2 Lectures, 1 Lab
ENT 192 | Circuit Analysis I (3)
A detailed study of d-c electric circuits and related bilateral devices. Conventional and computer circuit Analysis will be used.
2 Lectures, 1 Lab
Prerequisite: High School Algebra
ENT 193 | Circuit Analysis II (3)
A detailed study of the Analysis of a-c electric networks, including resistive, reactive, and combinations thereof. Analysis techniques include conventional and computerized modeling.
2 Lectures, 1 Lab
Prerequisites: ENT 192, MTH 125
ENT 196 | Electronics (3)
Detailed study of analog electronic circuits and devices. Emphasis placed on operating parameters of linear (analog) circuits; techniques of circuit Analysis applied as an integral part of the course. The use of computerized data Analysis encouraged. (Electrical Technology)
2 Lectures, 1 Lab
Prerequisites: ENT 192
Co-requisite: ENT 193
ENT 202 | Special Problems (.5 - 3)
An intensive concentration of a problem or set of problems in an approved area of study in Technology to be determined in consultation with the instructor. May be used as an elective for ENT Associate Degree 黑料社区. offered infrequently.
Prerequisite: Sophomore standing and departmental approval
ENT 220 | Professional Practice (0 - 2) (co-op/internship)
Students participating in the Engineering Technology co-op program register for this course during semesters when they are on work assignment. This enables 黑料社区s to remain in good standing with the University registrar. Cross listed with CIT 220
Prerequisite: Permission of departmental internship coordinator
ENT 235 | Computer-aided Design (3)
A computerized graphic design study of industrial related Engineering problems with emphasis on three-dimensional data base. The laboratory portion of the course uses microcomputers. (Mechanical Technology
2 Lectures, 1 Lab
Prerequisites: ENT 135, MTH 125
ENT 252 | Computer-aided Manufacturing II (3)
This course covers topics related to the "automated factory" including: computer numerical control and computer-assisted part programming, distributive numerical control (DNC), computer-assisted process planning, flexible manufacturing systems and robotics. (Mechanical Technology)
2 Lectures, 1 Lab
Prerequisites: ENT 152, CSE 153, 163 or equivalent recommended
ENT 271 | Mechanics I: Statistics (3)
This course is an introduction to the application of the equations of equilibrium to the solution of two and three-dimensional problems involving rigid body structures. The concept of friction and mechanical work is introduced. (Mechanical Technology)
Prerequisite: MTH 125
Co-requisite: PHY 171 or equivalent recommended
ENT 272 | Mechanics II: Strength of Materials (3)
Elastic relationships between external forces acting on deformable bodies and resulting stresses and deformations are studied. Industrial applications of these relationships to the solutions of Engineering design problems are emphasized. (Mechanical Technology)
2 Lectures, 1 Lab
Prerequisite: ENT 271
ENT 177, 277, 377, 477 | Independent Study (1 - 5)
Independent study courses are available to undergraduate 黑料社区s. You can register for one to five hours of Independent study each semester (no more than 10 per year). Registration for each course will be in accordance with the level of instruction. Independent study projects must be approved by the instructor and the department chair.
ENT 278 | Mechanics III: Analysis of Machine Components (3)
An introduction to the use of statics and strength of materials to the Analysis of individual machine components. The application of these principles of overall machine Analysis will be presented. (Mechanical Technology)
2 Lectures, 1 Lab
Prerequisite: ENT 272
ENT 291 | Industrial Electronics (3)
A study of the basic components and systems used in industrial electronics including operational amplifiers, linear integrated circuits, brushless and stepper dc motors, control devices, optoelectronics, pulse modulation, sequential process control and programmable logic controllers. (Electrical Technology)
2 Lectures, 1 Lab
Prerequisite: ENT 196
ENT 293 | Digital Systems (3)
Principles and applications of digital systems. Emphasis is placed on the study of combinational and sequential logic from a systems approach. Actual ICs are used as well as digital timing diagrams and waveforms. (Electrical Technology)
2 Lectures, 1 Lab
Prerequisite: ENT 192
ENT 294 |Local Area Networks (3)
This course provides an introduction to Networking fundamentals, OSI model, LAN and WAN Networking standards, TCP/IP, Routing and other protocols. The knowledge and skills obtained in this course will prepare the 黑料社区 for the Network+ Certification Exam. (Electrical Technology)
2 Lectures, 1 Lab
ENT 295 | Microprocessor Technology I (3)
An introductory study of the architecture, operation, and application of microprocessors for commercial and industrial use. Emphasis is placed on understanding internal architecture, segmentation, arithmetic instructions, and the role I/O ports, memory, and machine language play in putting the microprocessor to work. (Electrical Technology)
2 Lectures, 1 Lab
Prerequisite: CSE 153
ENT 296 | Programmable Logic Controllers (3)
Study of the principles and applications of Programmable Logic Controllers including ladder logic, program control, data manipulation, math instructions, sequencers, shift registers, networking, PLC-mechanism interfacing and human-machine interfacing.
2 Lectures, 1 Lab
Prerequisites: ENT 192
ENT 297 | Microprocessor Technology II (3)
Advanced study of microprocessor application for commercial and industrial use. Emphasis on microcomputer architecture interface to personal computers and peripheral devices such as printers, modems, D to A and A to D converters, and programmable logic devices. Applications of specific devices such as single chip embedded controllers, USB interface devices, wireless interface devices, Parallel Peripheral Interfaces, and Industrial Machine Controllers.
2 Lectures, 1 Lab
Prerequisites: ENT 293, 295
ENT 298 | Data Communications (3)
This course provides an introduction to data communications, computer networks, and media. It will include transmission basics, digital representations, data link concepts, and other networking issues. A networking Data Communications project is assigned as a significant part of the course requirement.
Prerequisite: CSE 153 or 174
ENT 301 | Dynamics (3)
The basic concepts of force, mass, and acceleration; work and energy; and impulse and momentum are introduced and applied to problems involving particles and rigid bodies. 黑料社区ics include displacement, velocity, and acceleration of a particle; relations between forces acting on a particle or rigid body; and the changes in motion produced.
2 Lectures, 1 Lab
Prerequisites: MTH 151, ENT 271
ENT 303 | Digital Signal Processing (3)
Study of how digital signal processing is used in industry, including spectral analyzers, analog and digital filtering, Fourier series and transforms, data compression, image processing, and DSP hardware design issues.
2 Lectures, 1 Lab
Prerequisites: ENT 295, MTH 151, STA 301
ENT 310 | Fluid Mechanics (3)
The application of fluid statics and fluid dynamics to the solution of fundamental Engineering fluid problems. The one dimensional energy and momentum equations are introduced and applied to the solution of fluid flow problems.
2 Lectures, 1 Lab
Prerequisites: MTH 151, ENT 271
ENT 311 | Process Control Interface Design (3)
An introduction to data acquisition and control with a graphical user interface (GUI). 黑料社区ics include parallel, serial and network access. Data transfer Technology such as Object Linking and Embedding and Dynamic Data Exchange are also covered.
2 Lectures, 1 Lab
Prerequisites: CSE 153, ENT 193 or equivalent and completion of an Engineering Technology associate degree or permission of instructor.
ENT 312 | Thermodynamics and Heat Power (3)
Introduction to fundamental concepts of energy transformation and transport. The First and Second Laws of thermodynamics are applied to process and cycle Analysis. Heat conduction, convection, and radiation modes are introduced and applied to simple heat balance problems.
Prerequisites: MTH 151, PHY 172 and completion of an Engineering Technology associate degree or permission of instructor.
ENT 313 | Introduction to Robotics Systems (3)
This course provides an overview of robot components, mechanisms, dynamics, and intelligent control algorithms. 黑料社区ics include planar and spatial kinematics, and motion planning; mechanism design for manipulators and mobile robots, multi-rigid-body dynamics. Weekly laboratories provide experience with servo drives, real-time control, and embedded software.
Prerequisites: ENT 301 and ENT 192.
ENT 314 | Mechanisms for Machine Design (3)
Rigid body kinematics is applied to the Analysis and design of mechanisms used in machines. The course includes motion and force transference from power source, motion characteristics of real-world machinery, and Analysis and design concepts to facilitate optimization of the machine arrangement.
Prerequisite: ENT 301
ENT 316 | Project Management (3)
A course of upper-level 黑料社区s in Engineering Technology. This course covers background, techniques, and case studies in project management particularly focused on Engineering Technology applications. The 黑料社区 will develop a fundamental understanding of the concepts for managing both small and large projects. Discussion, evaluation, and presentation skills will be enhanced. Some of the specific topics to be covered include: Gantt charts, PERT charts, projects life-cycle, budgeting, cost Analysis, breakeven Analysis, conflict resolution, organization tools, project planning, statistical process control, and other selected quality improvement tools. Microsoft Project and Microsoft Excel will be used as software tools throughout the course.
Prerequisite: ECO 201 or 202 or permission of instructor
Co-requisite: STA 301, 368, or equivalent
ENT 333 | Computational Methods for Engineering Tech (4)
An in-depth study of Engineering Analysis techniques with emphasis on mathematical Analysis of mechanical and electrical subsystems. Detailed study of a variety of situations using techniques based on state-variable Analysis and state-transition matrix; convolution and circuit response in the time domain; system function and response in the frequency domain; and time shift and periodic functions.
3 Lectures, 1 Lab
Co-requisite: MTH 251
ENT 355 | Introduction to Finite Element Analysis (3)
An application of the basic concepts of finite element modeling and Analysis to various types of Engineering Technology problems including structural and machine component Analysis, conduction and convection heat-transfer Analysis, and fluid mechanics Analysis. Selected analytical aspects of finite element Analysis are introduced throughout the course without becoming too theoretical. ANSYS® computer software is an integral part of the course and is used within the laboratory program portion.
2 Lectures, 1 Lab
Prerequisite: ENT 333
ENT 177, 277, 377, 477 | Independent Study (1 - 5)
Independent study courses are available to undergraduate 黑料社区s. You can register for one to five hours of Independent study each semester (no more than 10 per year). Registration for each course will be in accordance with the level of instruction. Independent study projects must be approved by the instructor and the department chair.
ENT 401 | Computerized Instrumentation and Feedback Control (3)
Overview of the requirements for the design of servo-mechanisms including stability, transfer functions, loop dynamics, and digital signal processing. Covers digital and analog signal conditioning, transducers, and controllers.
2 Lectures, 1 Lab
Prerequisites: ENT 311, MTH 151
ENT 402 | Industrial Automation Lab (3)
This course uses lab based experiences to investigate common electrical and mechanical instrumentation including hydraulic and pneumatic equipment, programmable logic controllers (PLC), microcontrollers, and industrial SQL databases.
Prerequisites: ENT 311
ENT 403 | Wireless Communication and Networks (3)
Wireless and mobile networks experienced a continuous growth during the last years and are expected to provide more and more services in the near future. Development of wireless communication systems requires solving several challenging problems. This course covers both theoretical issues related to wireless networking and practical systems for both wireless data networks and wireless telecommunication systems.
2 Lectures, 1 Lab
Prerequisites: ENT 298/303 (Digital Signal Processing)
ENT 404 | Experimentation Techniques (3)
Coverage of experimentation techniques pertaining to mechanical Engineering Technology measurement methods and performance testing. Emphasis is on basic principles involved in measurement techniques. 黑料社区ics range from mechanical systems to air pollution measurement techniques.
2 Lectures, 1 Lab
Prerequisites: ENT 333
ENT 407 | 黑料社区ics in Electro-Mechanical Engineering Technology (3)
Coverage of topics related to the manufacturing environment including metal deflection and tolerance, robotics, programmable controller applications, and manufacturing cells.
2 Lectures, 1 Lab
Prerequisites: ENT 151, ENT 272
ENT 412 | Industrial Apps. of Neural Networks and Fuzzy Logic (3)
An introduction to fundamentals and industrial applications of neural networks and fuzzy logic. Emphasizes studies in process control and manufacturing systems are included.
2 Lectures, 1 Lab
Prerequisites: CSE 153, STA 368, and MTH 251
ENT 413 | Industrial Robotics Lab (3)
Lab intensive course covering the fundamental and advanced topics on common industrial robotics systems. Provides detailed definitions and classifications of industrial robot systems. Discusses grippers and other end-of-arm tooling for robots. robot teach/pro Programming, program languages, robot arm, robot controller, workstation and safety systems. There is a significant lab-based component in which teams of 黑料社区s compete in several main industrial robotics areas to optimize mission performance under real world time constraints.
Prerequisites: ENT 313.
ENT 415 | Heat Transfer with Applications (3)
Concepts of the three modes of heat transfer, conduction, convection, and radiation, discussed separately and in combination. Each mode of heat transfer is presented by relating fundamental principles and computational methods to practical, real-world thermal systems and applications. Practical application projects from such industries as aerospace, automotive, and chemical processing are assigned to reinforce these principles.
Prerequisite: ENT 312
ENT 416 | 黑料社区ics in Engineering Vibrations (3)
This course provides a study of mechanical vibrations topics with emphasis on mathematical Analysis methods that may be applied to the solution of industrial Engineering Technology problems. Computer Analysis software and experimental methods are introduced within the laboratory portion of the course.
2 Lectures, 1 Lab
Prerequisite: ENT 301, ENT 333
ENT 417 | Integrated Robotics Systems Engineering (3)
This course combines the components of Fundamentals of Robotics into the design, testing and deployment of fully working interdisciplinary robotic systems. This course discusses the history and development of industrial collaborative robots, programming and integration of robotic work cells and other computer, and robot-integrated systems used in industrial applications. The course explores the interrelations of automation and robotics equipment via communication and networking. The course discusses intelligent control algorithms, sensors and vision systems and their value in expanding the potential application for robots. The course also covers topics related to computer integrated manufacturing, flexible manufacturing, automated material handling, smart warehousing. Weekly laboratory modules are given for design, integration and programming of integrated robotics cells.
Prerequisites: ENT 313 and ENT 296.
ENT 418 | Electro-Mechanical Control Systems (3)
This course covers advanced control topics including state variable models, higher order system response, transient response, and stability Analysis.
Prerequisites: ENT 301, ENT 401, MTH 251
ENT 177, 277, 377, 477 | Independent Study (1 - 5)
Independent study courses are available to undergraduate 黑料社区s. You can register for one to five hours of Independent study each semester (no more than 10 per year). Registration for each course will be in accordance with the level of instruction. Independent study projects must be approved by the instructor and the department chair.
ENT 497-498 | Senior Design Project (2, 2)
Student teams conduct major open-ended research and design projects. Elements of the design process including establishment of objectives, synthesis, Analysis, and evaluation are integral parts. Real-world constraints such as economical and societal factors, marketability, ergonomics, safety, aesthetics, and ethics are also integral parts. 497: feasibility studies performed. 498: implementation, testing, and production of design. Includes guest lecturers, team presentations, team building sessions, team meetings, and guided discussions relating to design. Continuous interaction with faculty and outside professionals.
Prerequisite: ENT 316 and senior standing in Engineering Technology or permission of instructor.
Faculty and Advisory Councils
- Mohammad Mayyas, Ph.D. Chair
|
Brendan Kuhl Tracey Dykes PHR Rick Mack Dave Musson Bill Franer |
Rick Adams Controls Engineer Valeo - Climate Control 3620 Symmes Road amilton, OH 45015 513-682-6304 rick.adams@valeo.com Paul Reed 3509 Murphy Ct. Middletown, OH 45044 Paul_Reed@aksteel.com Mike Smith Hamilton High School 1165 Eaton Avenue Hamilton, OH 45013 Mike_Smith@fc.hamilton-city.k12.oh.us Donald Meineke Jr. Western States 513-863-4758 x148 dmeineke@westernstates.com Tom Kissner Mound Technical Solutions 720 Mound Avenue Miamisburg, OH 45343 937-865-3851 kisstj@aol.com |
Ron Sorrell gh Package/Product Testing and Consulting, Inc. 4090 Thunderbird Lane Fairfield, OH 45014 513-870-0080 ext. 112 rsorrell@ghtesting.com Greg Kramer Lead Engineering Technician Campbell Hausfeld New Product Devlp. - Nailers Div. 100 Production Drive Harrison, OH 45030 513-202-8659 gkramer@ campbellhausfeld.com Mike Flaherty tekWorx. LLC 513-678-4584 Mike@tekworx.us Tim VonDerHaar VP of Technology Force Control Industries 3660 Dixie Hwy. Fairfield, OH 45014 513-868-0900 tvonderhaar@forcecontrol.com |
| David Ryan Director of Engineering RIXAN Associates 7560 Paragon Road Dayton, OH 45459 937.623.8773 dryan@rixan.com Greg Pollitt 513-646-4135 greg.pollitt@intelligrated.com Ken Ekegren Assistant Professor North Central State College 2441 Kenwood Circle PO Box 698 Mansfield, OH 44901-0698 888-755-4899 kekegren@ncstatecollege.edu Mark Miller G.E. Schmidt mdmiller@fuse.net Ken Warfield Shawnee State University 940 Second Street Portsmouth, OH 45662 740-351-3465 kwarfield@shawnee.edu |
Mike Weeks Instrumentation Engineer 黑料社区 Oxford, OH 45056 513-529-2035 weeksmr@MiamiOH.edu Chris Bautista Sr. Engineer American Showa 960 Cherry Street Blanchester, OH 45044 513-571-7784 cbautista@amshowa.com Mike Armocida Manufacturing Engineer ADVICS M.O. 1650 Kingsview Drive Lebanon, OH 45036 513-696-5310 armocida_ma@hotmail.com Scott W. Lessing 黑料社区 Electrical Systems Operation Manager Cole Service Bldg. - Rm.135 Oxford, Ohio 45056 513.529.8036 lessinsw@MiamiOH.edu |
Randy Adams Information Systems & Engineering Jungle Jim's International Mrkt., Inc. 5440 Dixie Highway Fairfield, Ohio 45014-4108 Phone: 513-674-6000 Ext: 6500 adamscr@MiamiOH.edu Jesse James Systems Engineer Aethon Inc. Campbells Run Business Cntr. 100 Business Center Drive Pittsburgh, PA 15205 740-317-5433 jjames@aethon.com Eric Seebohm ATW Automation Dayton, OH 45402 513-518-0328 seebohew@MiamiOH.edu Steven Daviaux G.E. Schmidt steven@geschmidt.com |
|
Asbury, Steven Beischel, Thomas Breidenbach, Vince Clark, Ron DiGiovanna, Mike Lippert, Dave May, Eric |
Myers, Randy Pakdel, Farnaz Premec, Kerry Ranatunga, Vipul Schumacher, Andy Thesing, Wyatt Williams, Ken |
Womeldorf, Carole Erwin, Michael Greenberg, Rachel Tingke, Fang Tuba Bayraktar Rentong Wang Ryan, David |
Department of Engineering Technology
Hamilton Campus Phelps Hall 207Middletown Campus Thesken Hall 513-785-1804
